Sagemcom UPDATE THE SOFTWARE OF YOUR BOXER

1. Copy the file "SC604CEF.XXXX in a usb key ( max 8G)

2. Connect the box to a tv set

3. Unplug the STB from power and connect the USB to the box                

 4.     Keep pressing the [RESET] button under the STB with the paper clip (hint: use the weight of STB to make sure that button is pressed)

5. Power up the STB

     6. Release the [RESET] button when the TV shows the Boxer logo, along with one filled dot out of    three.

      7. STB will then reboot, and show the download screen

      8. Wait under the progress bar finishes (less than 1 minute)

9. The STB will reboot; once the process finished, open the Menu, then go to "Menu/advanced/Information" to check the SW version

For more information, call as in: 0046108885726

1. Copy the file "SC604CDF.xxxxx in a usb key ( max 8G)

2. Plug in the USB device that contain new firmware into the STB

3. Plug out the power cable

   4. Press the P+ button and keep it pressed 

5. Plug in the power cable        

6. Wait until the download is launched to release the P+ button

 7. STB will then reboot, and show the download screen    

 8. Select 'OK' and Press Ok key

For more information, call us in: 0046108885726

1. Copy the file SC604HH.nn in a usb key ( max 8G)

2. Plug in the USB device that contain new firmware into the STB

3- Plug out the power cable of the STB

4- Plug in the power cable of the STB

5- Keep pressing on P+ and P- buttons on the STB front Panel until launch of the download process

6- Wait to the end of download and check the Version number under the Menu /Techchical information /Product data

For more information, call us in: 0046108885726